[W|0.11.834] Comms console connected to power says no power, adjacent switch off

Started by Axelios, June 23, 2015, 02:59:37 AM

Previous topic - Next topic


Hi all.

I think I found another bug.
I have a power conduit running around a comms console, and through a switch right next to the console.
The console is connected to the conduit before the switch, so it should be fine.
However, when the switch is turned off, the comms console gets no power, despite reporting being connected to a net with lots of power.

Switched Off:

Switched On:

Note that you can *just* see the connection wire, directly north of the console. There is plenty of power on that conduit, and yet if switch adjacent to console is off, console ignores the power AND flickers on and off slightly. (I will test lamps to see if that is related to another bug..).

Please see if you can reproduce this bug.
I can't seem to reproduce it.

World, save, output log attached.

[attachment deleted due to age]
I'm an Electrical and Electronic Engineering student in university in New Zealand.

I like games, but unfortunately they don't help me get a degree.. so I'm going to be inactive for awhile.
- 22 July 2015


Thanks for reporting. I just changed it and it seems to be fixed by some fixes I made earlier to the power nets system.
Tynan Sylvester - @TynanSylvester - Tynan's Blog