[B18][Mod Updater] ModSync Ninja

Jaxxa · January 06, 2018, 11:43:39 PM

I am trying to sing up with a modder account, signing in now says "Invalid username or password." and registering says "You don't have any mods in ModSync Ninja yet or this account is already registered. you must first upload one mod.".

If some one with access could have a look at it that would be appreciated.

Kiame · January 07, 2018, 04:42:49 AM

You need to first post a mod. Once a mod is posted then you can create an account.

Jaxxa · January 07, 2018, 05:05:19 AM

I had done that. I tried creating an account before but I don't know if it worked right, the password I set before isnt working to login.

http://www.modsync.ninja/Mods/Details/73cfa067-2dd1-4368-b19c-6b1d5f996046

historic_os · January 07, 2018, 08:23:18 PM

hey Jaxxa, for your first log-in you will need to "register" (which is only picking a master key). make sure you fill your actual forum account name. the name is case sensitive so in your case it will be Jaxxa.
You'll also need to enter the key to one of your current mods (to verify its actually you)

Jaxxa · January 07, 2018, 08:49:20 PM

Thanks, looks like it was my fault for not noticing that it was Case Sensitive, looks to be working now.

ridjack · January 19, 2018, 07:56:29 PM

Very minor gripe: Could you please move 'Rimworld' in the folder name to be AFTER the name of the mod? It's slightly annoying to go looking for a specific folder and end up looking in the wrong place because it's got the name of the game in front of it. I end up renaming it myself, of course, but it'd be nice to not need to.

Roolo · March 16, 2018, 01:13:36 PM

Hmm I've probably done something wrong. I added Modsync to RunAndGun, and wanted to get a ModSync account after that. However, when I try to create the account using the id in the ModSyncNinjaData xml, I get: Could not find mods matching the mod key provided linked to this forum account. Did I miss something?

Edit: never mind. It was my fault, used the wrong key.

Roolo · March 17, 2018, 07:31:54 AM

The previous issue is resolved, but now I try to get the auto updating using GitHub working, however, ModSync Ninja doesn't seem to recognize the URL.

The site states:
Link to the ModSync.xml file in your repo's working branch and we will automatically watch your file for changes.

I filled in:
https://github.com/rheirman/GiddyUpCore/blob/master/About/ModSync.xml

And I'm getting:
Invalid GitHub link pattern.

Also linking to the raw, or the URL without "blob" in it didn't work.

historic_os · March 20, 2018, 11:27:41 PM

Quote from: Roolo on March 17, 2018, 07:31:54 AM
The previous issue is resolved, but now I try to get the auto updating using GitHub working, however, ModSync Ninja doesn't seem to recognize the URL.

Hey Roolo, very sorry for the late response. busy days, haven't had the time to check the forums.

Have you gotten the issue resolved? I'm getting no issue with the URL you have pasted (https://github.com/rheirman/GiddyUpCore/blob/master/About/ModSync.xml).
The regex we use seems to accept it and it works for me on dev env.
Is this the exact URL? letter case as well?

Roolo · March 30, 2018, 12:29:17 PM

Quote from: historic_os on March 20, 2018, 11:27:41 PM
Quote from: Roolo on March 17, 2018, 07:31:54 AM
The previous issue is resolved, but now I try to get the auto updating using GitHub working, however, ModSync Ninja doesn't seem to recognize the URL.

Hey Roolo, very sorry for the late response. busy days, haven't had the time to check the forums.

Have you gotten the issue resolved? I'm getting no issue with the URL you have pasted (https://github.com/rheirman/GiddyUpCore/blob/master/About/ModSync.xml).
The regex we use seems to accept it and it works for me on dev env.
Is this the exact URL? letter case as well?

Thanks for your response. I somehow missed the notification of your reply so therefore my late reply, also sorry for that ^^. I tried the button again today, and I'm not getting the error message I reported before this time. Instead, it now goes to "Syncing with GitHub" indefinitely, and it doesn't update. So it's not yet working for me unfortunately.

TupiNUMBooR · May 26, 2018, 10:51:55 AM

I cant make it work, it always show this http://joxi.ru/D2PGoOofdQQJ9m
No info in logs: http://joxi.ru/vAWvo7oHkppO92
Tried windows and linux, tried load before and after core, always error 100.

historic_os · May 27, 2018, 07:33:11 AM

Error 100 means your request to the server was empty. what is shown at the bottom if you click the 2nd message showing "Your request:"?
Empy request could be caused due to earlier error too, do you have any errors in log previous to the ones you copied?

TupiNUMBooR · May 27, 2018, 11:44:06 AM

Seems empty http://joxi.ru/E2pXxPxHB5dOa2
Before there are only translation warnings.

Umbreon117 · May 27, 2018, 12:22:46 PM

Only now do I realize this is a thing...This reminds me a lot of "Version Checker" from the Starsector forum. Glad to see someone made a "Version Checker" for Rimworld!

Kiame · May 29, 2018, 12:47:27 AM

Due to ModSync.ninja losing support and from Jaxxa's excellent idea of having ModSync be decentralized, comes ModSyncRW. Very much just and idea with a bit of code it's very much an initial WIP. Please check in on the forum post for information and to share any thoughts on the current idea/approach.

https://ludeon.com/forums/index.php?topic=41603.msg409921#msg409921

Thanks!